AllPondSolutions 30000L Pressurised Pond Filter PFC-30000-KIT 12000L/H Pump

Pairing a 30,000 litre filter with an undersized pump wastes both. This kit settles the question by supplying the PFC-30000 pressurised filter together with the AquaECO-12000, a 12000L/H pump with 6.5m of max head and a 100w draw - enough to keep the filter properly pressurised and to lift the return where it needs to go.

Our Pressurised Pond Filters with built-in UV Clarifiers are designed to be continuously pressurised by your pond pump, maintaining excellent water quality for healthy fishkeeping. Water travels from the pump into the filter container and on to the outlet without dropping pressure, so the outlet can sit higher than the filter body - useful for hiding the unit around the pond and particularly useful if you are incorporating a waterfall.

The rotating cleaning handle on the head handles routine maintenance: turn it and the interior sponge is rinsed clean, reducing the need to dis-assemble. A small float pops out of the head to tell you when a detailed clean is required, and once rinsed a separate outlet can be opened to discharge the dirty water until it runs clean.

A built-in UV Light comes with each unit, effectively preventing growth of algae and eliminating harmful micro-organisms and parasites which may cause fish diseases.

Filtration

Water passes through the PFC-30000 in the following order:

1. Pond water flows into the PFC-30000 via your pond pump
2. Initial filtration begins by removing large particles through a mixture of coarse and fine filter foams (mechanical filtration)
3. Then the water passes across bio balls that harbour good bacteria across large surface area (biological filtration)
4. Lastly the exiting water is exposed to a 55w UV steriliser capable of reducing harmful bacteria and algae
5. Clean, clear and healthy water exits your PFC-30000 and returns to your pond.

Features

• Each unit is supplied with 7 large filter foams
• 4 x fine yellow (large)
• 3 x coarse blue (large)
• Includes bio balls and cage
• Pressurised Filter allows exiting water to run up-hill – Max 3m
• Biological and Mechanical Filter chambers for more efficient removal of dissolved and solid waste
• Simple Quick Handle Cleaning System for Easy Maintenance (no need to open and clean foams all the time)
• Enables Rapid Growth of Aerobic Bacteria resulting in removal of Lethal Ammonia and Nitrite
• Able to Cope with Higher Water Flows compared to Traditional Gravity Filters
• Complete with Inlet and Outlet Hose Adapters
• Includes waste tap outlet (fits 25, 32 and 38mm hose)

AllPondSolutions AquaECO Pond Pump (AQUAECO-12000)

The AquaECO series of pond pumps from AllPondSolutions uses innovative new electronics to bring massive energy savings, low noise and long durability while maintaining high performance. Compared to other pond pump brands the wattage use of the AquaECO range of pond pumps is extremely economical, saving you money in the long run.

The pump is designed to circulate water to a pond filter or waterfall, and its cage is specially designed to prevent clogging by providing the maximum surface area for drawing water in through the guard to the pump. An additional inlet is included with the AquaECO pump, allowing you to attach hose to the pump inlet and feed it directly from a source such as a pond skimmer.

• Model: AquaECO-12000
• Max flow rate - 12000L/H
• Wattage: 100w
• Max head - 6.5m

Please Note : In compliance with UK electrical regulations, these pond filter kits are supplied without a fitted UK plug. A suitable plug or outdoor switch box must be purchased separately.